• Plant Components Menu

Paint for Ductwork & Knockout Boxes

Choose Your Temperature Range

  • Up to 400°F
  • Up to 500°F
  • Up to 1000°F

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 400°F

Universal Hot Mix - The #1 System for Batch Towers & High Temp Areas

Our Universal Hot Mix system is tailor made for asphalt plants. It has been widely used in the HMA industry for 30 years. It was developed along side equipment manufacturers, facility owners and industry professionals. 

400°F Universal Hot Mix Primer

860-HF Series

Universal Hot Mix Primer - AKA 860-HF Series is our #1 primer for HMA plants. It provides longer-lasting service life, corrosion protection and rust prevention for areas ranging from ambient to 400°F.

400°F Universal Hot Mix Topcoat

865-LH Series

Universal Hot Mix Topcoat - AKA 865-LH Series is our #1 topcoat for HMA plants. It provides fantastic color and gloss retention, and a high gloss finish. It is a premium option for areas ranging from ambient to 400°F.

Spray-Safe Dry Fall Paint System for Areas up to 400°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of busy cities.

400°F High Temp Dry Fall Primer

830 Series

830 Series is a unique high temperature dry fall primer. It provides superior corrosion protection and service life. Additionally, it is surface tolerant and may be applied directly over marginally prepared surfaces.

400°F High Temp Dry Fall Topcoat

840 Series

840 Series is a unique high temp dry fall topcoat. It provides superior color retention and UV Resistance. Additionally, it features a premium gloss finish and comes in standard and custom colors.

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 500°F

Hot Spot Eliminator - Eliminate Color Shift & Premature Failure

Our Hot Spot Eliminator paint system was designed to eliminate the premature color shift and rusting seen on KO boxes and ductwork. This system provides superior corrosion protection and color stability in temperatures up to 500°F.

500°F Hot Spot Eliminator Primer

802 Series

Hot Spot Eliminator Primer - AKA 802 Series was designed to prevent premature rusting in hot spots on ductwork and knockout boxes. It provides superior durability, service life and corrosion resistance.

500°F Hot Spot Eliminator Topcoat

815 Series

Hot Spot Eliminator Topcoat - AKA 815 Series was specifically designed to prevent color shift on ductwork and knockout boxes. It provides premium color stability in temperatures up to 500°F.

Spray-Safe Dry Fall Paint System for Areas up to 500°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of busy cities.

500°F High Temp Dry Fall Primer

827-HB Series

827-HB Series is our most advanced high temp dry fall coating. It features superior resistance to cracking, high build barrier properties, and no heat cure requirement.

500°F High Temp Dry Fall Topcoat

815-DF Series

815-DF Series provides the same fantastic UV resistance, heat resistance, color retention and performance as our standard spray version in a dry fall Spray-Safe formulation.

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 1000°F

Hot Spot Eliminator 1000 - 1000°F Coating System for Ductwork & KO Boxes

Our Hot Spot Eliminator 1000 paint system was designed for those plants that are pushing extreme temperatures. This system is well suited for soil incineration plants and asphalt plants running a high percentage of recycled materials.

1200°F Hot Spot Eliminator 1000 Primer

827-HB Series

827-HB Series is our most advanced high temperature primer. It features superior resistance to cracking, extremely high build barrier properties, and no heat cure requirement.

1000°F Hot Spot Eliminator 1000 Topcoat

899 Series

899 Series features our highest rated custom color stability. Additionally, it is highly resistant to fading and cracking. It outperforms competitor products in the same category.

Spray-Safe Dry Fall Paint System for Areas up to 1000°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of a busy city.

1200°F High Temp Dry Fall Primer

827-HB Series

827-HB Series is our most advanced high temp dry fall coating. It features superior resistance to cracking, high build barrier properties, and no heat cure requirement.

1000°F High Temp Dry Fall Topcoat

899 Series

899 Series features our highest rated custom color stability, and is highly resistant to fading and cracking; all with the added benefit of our Spray-Safe dry fall capabilities.

  • Up to 400°F
  • Up to 500°F
  • Up to 1000°F

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 400°F

Universal Hot Mix - The #1 System for Batch Towers & High Temp Areas

Our Universal Hot Mix system is tailor made for asphalt plants. It has been widely used in the HMA industry for 30 years. It was developed along side equipment manufacturers, facility owners and industry professionals. 

400°F Universal Hot Mix Primer

860-HF Series

Universal Hot Mix Primer - AKA 860-HF Series is our #1 primer for HMA plants. It provides longer-lasting service life, corrosion protection and rust prevention for areas ranging from ambient to 400°F.

400°F Universal Hot Mix Topcoat

865-LH Series

Universal Hot Mix Topcoat - AKA 865-LH Series is our #1 topcoat for HMA plants. It provides fantastic color and gloss retention, and a high gloss finish. It is a premium option for areas ranging from ambient to 400°F.

Spray-Safe Dry Fall Paint System for Areas up to 400°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of busy cities.

400°F High Temp Dry Fall Primer

830 Series

830 Series is a unique high temperature dry fall primer. It provides superior corrosion protection and service life. Additionally, it is surface tolerant and may be applied directly over marginally prepared surfaces.

400°F High Temp Dry Fall Topcoat

840 Series

840 Series is a unique high temp dry fall topcoat. It provides superior color retention and UV Resistance. Additionally, it features a premium gloss finish and comes in standard and custom colors.

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 500°F

Hot Spot Eliminator - Eliminate Color Shift & Premature Failure

Our Hot Spot Eliminator paint system was designed to eliminate the premature color shift and rusting seen on KO boxes and ductwork. This system provides superior corrosion protection and color stability in temperatures up to 500°F.

500°F Hot Spot Eliminator Primer

802 Series

Hot Spot Eliminator Primer - AKA 802 Series was designed to prevent premature rusting in hot spots on ductwork and knockout boxes. It provides superior durability, service life and corrosion resistance.

500°F Hot Spot Eliminator Topcoat

815 Series

Hot Spot Eliminator Topcoat - AKA 815 Series was specifically designed to prevent color shift on ductwork and knockout boxes. It provides premium color stability in temperatures up to 500°F.

Spray-Safe Dry Fall Paint System for Areas up to 500°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of busy cities.

500°F High Temp Dry Fall Primer

827-HB Series

827-HB Series is our most advanced high temp dry fall coating. It features superior resistance to cracking, high build barrier properties, and no heat cure requirement.

500°F High Temp Dry Fall Topcoat

815-DF Series

815-DF Series provides the same fantastic UV resistance, heat resistance, color retention and performance as our standard spray version in a dry fall Spray-Safe formulation.

Choose Your Application Type

Standard Spray Applied High Temp Paint System for Areas up to 1000°F

Hot Spot Eliminator 1000 - 1000°F Coating System for Ductwork & KO Boxes

Our Hot Spot Eliminator 1000 paint system was designed for those plants that are pushing extreme temperatures. This system is well suited for soil incineration plants and asphalt plants running a high percentage of recycled materials.

1200°F Hot Spot Eliminator 1000 Primer

827-HB Series

827-HB Series is our most advanced high temperature primer. It features superior resistance to cracking, extremely high build barrier properties, and no heat cure requirement.

1000°F Hot Spot Eliminator 1000 Topcoat

899 Series

899 Series features our highest rated custom color stability. Additionally, it is highly resistant to fading and cracking. It outperforms competitor products in the same category.

Spray-Safe Dry Fall Paint System for Areas up to 1000°F

Highland High Temp Dry Fall Coatings

Never worry about overspray again. When using our high temp dry fall coatings, all overspray is dry to a powder within 20 feet of the application site. This unique benefit allows for spray application in high risk areas. Our high temp dry fall coatings have been utilized on asphalt plants next to car dealerships, busy roads, and right in the middle of a busy city.

1200°F High Temp Dry Fall Primer

827-HB Series

827-HB Series is our most advanced high temp dry fall coating. It features superior resistance to cracking, high build barrier properties, and no heat cure requirement.

1000°F High Temp Dry Fall Topcoat

899 Series

899 Series features our highest rated custom color stability, and is highly resistant to fading and cracking; all with the added benefit of our Spray-Safe dry fall capabilities.

Additional Information

Longer-Lasting Service Life

Superior Durability & UV Resistance Compared To Competitor Products

Specifically Designed for HMA Plants

Coatings Formulated for HMA Plants Alongside Industry Professionals

Rigorous Quality Control Standards

Every batch of paint is scrutinized to ensure the highest of quality standards.

NACE & SSPC Certified Support Staff

Our technical support staff is well trained & eager to solve your coating challenges.

Coating Process Evaluations

Our experienced technical representatives will visit your facility to evaluate and assist you in optimizing your spray equipment and techniques, your blast equipment, blast media, blasting techniques and more.

Application Training Classes

A partnership with Highland includes training classes for your paint crew. These classes include good painting practices, techniques to achieve high quality finishes, advanced surface preparation techniques, and more.  

Custom Coating Design Services

If we don’t already have the perfect coating for your process, our experienced chemists can develop a coating to your exact specifications including your ideal dry times, gloss levels, price point, and more.  

Gallons Recommendation Chart

HMA Plant Paint Paint for Asphalt Plants Paint for Duct Work Paint for Baghouses Paint for Asphalt Silos Paint for Drag Chain Paint for Conveyors Paint for Cold Feed Bins

Systems Selections Brochure

HMA Plant Paint Paint for Asphalt Plants Paint for Duct Work Paint for Baghouses Paint for Asphalt Silos Paint for Drag Chain Paint for Conveyors Paint for Cold Feed Bins

Overview Brochure

Industrial Coatings High Temp Paint Dry Fall Paint Chemical Resistant Paint Industrial Maintenance Paint OEM Paint

Got a Quick Question?

For any questions, send us a message and we will get back to you as soon as possible with all of the information you need to get started.


Warning: ftp_nlist() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 398

Warning: ftp_pwd() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 222

Warning: ftp_pwd() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 222

Warning: ftp_nlist() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 398

Warning: ftp_pwd() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 222

Warning: ftp_pwd() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 222

Warning: Use of undefined constant FS_CHMOD_DIR - assumed 'FS_CHMOD_DIR' (this will throw an Error in a future version of PHP) in /homepages/9/d808772860/htdocs/wp-content/plugins/speed-booster-pack/inc/core.php on line 1192

Warning: ftp_mkdir() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 535

Warning: Use of undefined constant FS_CHMOD_DIR - assumed 'FS_CHMOD_DIR' (this will throw an Error in a future version of PHP) in /homepages/9/d808772860/htdocs/wp-content/plugins/speed-booster-pack/inc/core.php on line 1193

Warning: ftp_mkdir() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 535

Warning: Use of undefined constant FS_CHMOD_FILE - assumed 'FS_CHMOD_FILE' (this will throw an Error in a future version of PHP) in /homepages/9/d808772860/htdocs/wp-content/plugins/speed-booster-pack/inc/core.php on line 1200

Warning: ftp_fput() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 204

Warning: ftp_chmod() expects parameter 1 to be resource, null given in /homepages/9/d808772860/htdocs/wp-admin/includes/class-wp-filesystem-ftpext.php on line 276