Paint Overspray is Powder Dry within 10-20 feet
from point of application…eliminating paint
overspray damage!

Even brush and roll paint application may cause paint damage problems when painting lofty structures such as this one. Paint droplets may travel miles when airborne and cause as much or more damage than overspray from spray application. Highland Dry-Fall is powder dry within 10-20 feet and overspray is easily wiped clean!

Paint Overspray is Powder Dry within 10-20 feet from point of application…eliminating paint overspray damage!

Highland Dry-Fall Paint allowed quick and efficient spray painting of this Southern Concrete Ready Mix Plant located within feet of the highway in Fletcher, NC. Because of the close proximity to highway traffic, they were very concerned about paint overspray damage but didn’t want the expense of brush and roll application. Highland Dry-Fall paint allows quick application with conventional or airless spray, saving time, money and eliminating overspray concerns!

HiTemp Dry-Fall Solvent-Borne Coatings

Highland HiTemp Dry-Fall Coatings were developed naturally by combining our two most dynamic products: High Performance HiTemp and Solvent-Borne Dry-Fall Coatings.

Typically spray application in congested areas creates high potential for overspray damage. To avoid this, most painters and facility owners will opt for labor intensive brush and roll application even though this will not completely eliminate paint damage from airborne paint droplets. Highland High Performance Dry-Fall Coatings allow "Spray-Safe" application, saving time and money.

Highland HiTemp Dry-Fall Coatings are used successfully in the field by a number of industries including: Refineries, Hot Mix Asphalt Plants, Incinerators and Chemical Processing Facilities. In addition to saving time and money by allowing safe and fast spray application, these coatings are known for their rugged durability, aesthetic appeal, and fast topcoat/recoat time. HiTemp Dry-Fall is available in Primers, Direct to Metal Coatings, and Topcoats with a range of temperature protection from ambient to 1200˚F.

  • Highland HiTemp Dry-Fall Coatings are up to 4 times faster to apply than brush and roll application! Don’t worry about paint overspray… it wipes off clean without chemicals or buffing.
  • Highland Solvent-Borne HiTemp Dry-Fall Coatings are 3-4 times longer-lasting than conventional alkyd and water-borne paint


Highland Dry-Fall Solvent-Borne Coatings

2-K Epoxy | 2-K Urethane | Acrylic

Highland Dry-Fall Solvent-Borne Coatings have changed the way contractors approach painting in congested areas. Projects previously viewed as “High Risk” for paint overspray damage were quoted at high rates, based on labor intensive brush and roll paint application. Facility owners were faced with extended plant down time and higher application costs. Highland Dry-Fall Coatings offer faster spray-safe applications saving time and money.

  • Highland Dry-Fall Coatings are up to 4 times faster to apply than brush and roll application! Don’t worry about paint overspray… it wipes off clean without chemicals or buffing.

  • Highland Solvent-Borne Dry-Fall Coatings are 3-4 times longer-lasting than conventional alkyd and water-borne paint
  • Highland Dry-Fall is also available in HiTemp Formulas with protection from ambient to 1200˚F.
CALL US TODAY AT: 1-828-265-2513